ExakTime Support has moved to Support Central.

This help site will be discontinued in the near future.

Setting Up Geofence Warnings and Restrictions

Last Modified on

As of ExakTime Mobile version 2.67, users can now be warned and/or restricted from clocking in to a location if their mobile device's GPS does not put them within the Geofence of their selected location. 

GeoFence Warnings/Restrictions will not affect the or Clock For function or when clocking Out. These warnings/restrictions will only occur if an employee is using the Clock In function and clocking In for themselves.

For information on how to set up a Geofence, you can refer to the following article: Setting up and Using the Geofence


For an employee to receive warnings or restriction messages when clocking in, the ExakTime Mobile user will need to allow ExakTime Mobile permission to use a mobile device's location services and you will need to enable the appropriate ExakTime Mobile security role permissions.

Allow Access To Location Services

For us to warn and/or restrict an employee from clocking in, ExakTime Mobile will need permission to access the location services of the mobile device. When first using ExakTime Mobile, it will prompt the user for permission. For iOS, press Always Allow. For Android, press Allow.


If the permission is denied, you can enable the permission through the settings of your phone.

Depending on the age of your iOS device, the steps may differ, but the idea is consistent.

  • Open Settings
  • Press ExakTime
  • Press Location
  • Press Always


The steps below may differ depending on the manufacturer and version of Android, but the idea is consistent.

  • Open your App Drawer
  • Press Settings
  • Press Apps (May also be called Applications, App Manager, etc.)
  • Press ExakTime
  • Press Permissions
  • Enable Location


Enable Security Role Permissions

For an employee to receive a warning and/or restriction, you will need to enable the appropriate function on ExakTime Connect in the Security Roles page. If you need assistance regarding Security Roles, you can refer to our article: In-Depth: ExakTime Mobile Security Role


By default, there will be no warning or restriction if the employee is not within the Geofence for their selected location.

You can enable any of the following options as needed.

  • Warning if the employee is not within the selected location or if the Geofence of the selected location is unknown.
    • Warning like above, but also require the employee to add a comment if they are clocking in outside a Geofence. The employee's comment will appear on their time card for you to review.
  • Restrict employees from clocking in outside a known Geofence or when trying to clock in to a location with no GeoFence. It is highly advised to consider federal, state and local labor laws when using this setting.

Other Considerations

If the mobile device is unable to provide ExakTime Mobile with Location Data, it will always give a warning or restrict the employee, depending on the permission enabled. This can be due to lack of location data from the mobile device due to poor reception or ExakTime Mobile does not have permission to use location services of the device. To ensure proper warning/restrictions, you can require the device's location services to be on and/or require a GPS fix before an employee is able to clock in/out. You can enable these requirements in Mobile Settings. You can read more about mobile settings here: In-Depth: Mobile Settings

What ExakTime Mobile Users See

Depending on the permission enabled, ExakTime Mobile users will see the following:

Warning Only


Warning with Explanation


Geofence Restriction


Was this article helpful?
3 out of 4 found this helpful

Comments 0